Vysvetlenie HRC, HRC, HV podmienky
1 ， Bit Bit HRA je 120+-0,5 ° Diamond Kuchonické telo s horným zakrivením 0,2+-0,002 mm a záťažou 60 kg.
2 ， Bit vŕtačky HRC je 120+-0,5 ° Diamond Kuchonické telo s horným zakrivením 0,2+-0,002 mm a záťažou 150 kg
3 ， HV diagonálny povrch 136 ° kvadrangulárne pyramídový diamantový vŕtací bit, Hodnota tvrdosti je špecifický tlak na plochu odsadenia, zaťaženie je 50/100 gramovou silou, prierezová plocha je niekoľko UM, hodnota je kg/mm
| HV | HRC | HRA | HV | HRC | HRA | HV | HRC | HRA |
| 1700.0 | 80.5 | 92.5 | 528.0 | 51.0 | 76.0 | 31.0 | 66.0 | |
| 1600.0 | 80.0 | 92.0 | 513.0 | 50.0 | 76.0 | 301.0 | 30.0 | 66.0 |
| 1550.0 | 79.0 | 91.5 | 498.0 | 49.0 | 76.0 | 29.0 | 65,0 | |
| 1500.0 | 78.0 | 91.0 | 48.5 | 75.0 | 28.5 | 65,0 | ||
| 1450.0 | 77.0 | 90,5 | 485.0 | 48.0 | 75.0 | 285.0 | 28.0 | 65,0 |
| 1400.0 | 76.0 | 90.0 | 47.5 | 74,5 | 27.5 | 64,5 | ||
| 1350.0 | 75.0 | 89.5 | 471.0 | 47.0 | 74.0 | 27.0 | 64,0 | |
| 1300.0 | 74.0 | 89.0 | 458.0 | 46.0 | 73.5 | 26.5 | 64,0 | |
| 1250.0 | 73,0 | 88.5 | 45.0 | 73,0 | 271.0 | 26.0 | 64,0 | |
| 1200.0 | 72.0 | 88.0 | 446.0 | 44,5 | 73,0 | 25.5 | 63,5 | |
| 1150.0 | 71.5 | 87.5 | 435.0 | 44,0 | 73,0 | 25.0 | 63,0 | |
| 1140.0 | 71.0 | 87.0 | 43.5 | 72.5 | 24.5 | 63,0 | ||
| 1076.0 | 70.0 | 86.5 | 43.0 | 72.0 | 257.0 | 24.0 | 62.5 | |
| 1004.0 | 69,0 | 86.0 | 413.0 | 42.0 | 72.0 | 23.5 | 62.0 | |
| 942.0 | 68.0 | 85.8 | 41.5 | 71.5 | 23.0 | 62.0 | ||
| 894.0 | 67.0 | 85.0 | 41.0 | 71.0 | 22.5 | 62.0 | ||
| 854.0 | 66.0 | 84,5 | 40.5 | 70,5 | 22.0 | 62.0 | ||
| 820.0 | 65,0 | 84.0 | 393.0 | 40.0 | 70,5 | 21.5 | 61.5 | |
| 789.0 | 64,0 | 83.5 | 39,5 | 70.0 | 21.0 | 61.0 | ||
| 763.0 | 63,0 | 83.0 | 39.0 | 70.0 | 20.5 | 61.0 | ||
| 739.0 | 62.0 | 82.5 | 38.5 | 69,5 | 236.0 | 20.0 | 61.0 | |
| 716.0 | 61.0 | 82.0 | 373.0 | 38.0 | 69,0 | 223.0 | 19.5 | 60.5 |
| 695.0 | 60.0 | 81.5 | 37.5 | 69,0 | 217.0 | 19.0 | 60.0 | |
| 675,0 | 59.0 | 81.0 | 37.0 | 69,0 | 18.5 | 60.0 | ||
| 655.0 | 58.0 | 80.5 | 36.5 | 68.5 | 209.0 | 18.0 | 60.0 | |
| 636.0 | 57.0 | 80.0 | 353.0 | 36.0 | 68.0 | 205.0 | 60.0 | |
| 56.5 | 79,5 | 35.5 | 68.0 | 197.0 | 59.0 | |||
| 617.0 | 56.0 | 79.0 | 35.0 | 67.5 | 195.0 | 58.0 | ||
| 598.0 | 55.0 | 78.0 | 334.0 | 34,5 | 67.0 | 191.0 | 57.5 | |
| 580.0 | 54,0 | 78.0 | 34,0 | 67.0 | 186.0 | 56.0 | ||
| 562.0 | 53.0 | 78.0 | 33.5 | 67.0 | ||||
| 545.0 | 52.0 | 77.0 | 317.0 | 32.0 | 67.0 | |||
| 51.5 | 76.5 | 31.5 | 66.0 |
Čas príspevku: 18. apríla 2014